Router Parts & Accessories - Page 2 - Super Savings! Save up to 37%


Super Savings! Up to 37% off on Router Parts & Accessories at Celebrity Dress Design, Page 2. Top brands include Abatron, Freud, CMT, SPTA, MLCS, Yonico, Plews, Autek, CNBTR, Superior Electric, Bosch, SILIVN, Woodpeckers Precision Woodworking Tools, & Whiteside Router Bits. Hurry! Limited time offers. Offers valid only while supplies last.



Abatron Wrk60r Wood Restoration Kit, 24 Oz
Abatron Wrk60r Wood Restoration Kit, 24 Oz
By Abatron
In Stock
$44.81
$38.99
You Save: 13%

mpn: EMW7330006, ean: 0051191331008,

4.7 out of 5 stars with 118 reviews
Abatron Wrk60r Wood Restoration Kit, 24 OzSize: 24 oz. All inclusive kit for restoring rotted or damaged wood. Includes: 12 oz LiquidWood, 12 oz WoodEpox, Applicator bottle, Putty knife, Measuring cup, Mixing stick. Ideal for interior or exterior repairs. Greenguard® certified products.


Freud 1/2'' (Dia.) Top Bearing Flush Trim Bit with 1/4'' Shank (50-102)
Freud 1/2" (Dia.) Top Bearing Flush Trim Bit with 1/4" Shank (50-102)
By Freud
In Stock
$28.70
$20.43
You Save: 29%

mpn: 50-102, ean: 7466655958548,

4.6 out of 5 stars with 115 reviews
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.Overall Dia. (D) 1/2'', Bearing Dia. 1/2'', Carbide Height (h) 1'', 1/4'' Shank. Cuts all composition materials, plywoods, hardwoods, and softwoods.. Use on hand-held and table-mounted portable routers..


CMT 806.690.11B Flush Trim Bit with Double Bearing, 2-Inch Cutting Length and 1/2-Inch Shank
CMT 806.690.11B Flush Trim Bit with Double Bearing, 2-Inch Cutting Length and 1/2-Inch Shank
By CMT
In Stock
$32.38
$31.36
You Save: 3%

mpn: 806.690.11B, ean: 0664252035694,

4.3 out of 5 stars with 25 reviews
Innovative two-flute router bit equipped with a double bearing and feature a down shear design, which allows for clean smooth cuts on many materials. Therefore it is no longer necessary to flip or move your tool if you need to ride it from either direction to the other side of your workpiece. You will benefit from this tool especially when routing curved elements along or against the grain. CMT orange bits have been rated the #1 overall router bits compared to other brands (Wood Magazine).


SPTA 10Pcs HSS Router Carbide Engraving Bits & 5Pcs Drill Bit-1/8''(3mm) Shank For Proxxon Dremel Rotary Tools for DIY Woodworking, Carving, Engraving, Drilling
SPTA 10Pcs HSS Router Carbide Engraving Bits & 5Pcs Drill Bit-1/8"(3mm) Shank For Proxxon Dremel Rotary Tools for DIY Woodworking, Carving, Engraving, Drilling
By SPTA
In Stock
$12.99

mpn: QA0301, ean: 0702382463441,

4.1 out of 5 stars with 13 reviews
✔Specifications: ▲Material: high speed steel. ▲Coating: titanium ▲Shank Diameter:1/8''(3mm) ▲Length:1-1/2''(40mm) ▲Quantity: 10 Pieces Hss Router Bit and 5Pcs Twist Drill Bit ✔Features: ➤Made from high-grade steel for long life and professional cut quality, featuring precision ground cutting edges, these outstanding router bit set will help you add inlays and decorative edges to your woodwork, creating custom shapes on door casings, trim, baseboards and pilasters. ➤A


MLCS 8369 1/2-Inch shank Carbide-tipped Router Bit Set, 30-Piece
MLCS 8369 1/2-Inch shank Carbide-tipped Router Bit Set, 30-Piece
By MLCS
In Stock
$139.95
$129.73
You Save: 7%

mpn: 8369, ean: 0718122840052,

4.4 out of 5 stars with 111 reviews
High quality router bit set at an incredible price. Just $3.33 per bit. Wood storage box included. Includes bits: 3 Cove (1/4'', 3/8'', 1/2''), 2 Flush Trim (3/8'', 1/2''), 3 Dovetail (14 deg-1/2'', 5/8'' & 9 deg-3/8''), 45 degree Chamfer, 2 Roman Ogee (5/32'', 1/4''), 6 Round Over (1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 1/2''), 5 Straight (1/4'', 5/16'', 3/8'', 1/2'', 3/4''), 1 Rabbeting (3/8''), 3 Round Nose (1/4'', 3/8'', 1/2''),1 Bevel (25 deg), 1 Slot Cutter (1/4''), 1 V-Groove (1/2''), 1


Yonico 14976 Bottom Cleaning Dado Router Bit with 1-1/2-Inch X 9/16-Inch 1/2-Inch Shank
Yonico 14976 Bottom Cleaning Dado Router Bit with 1-1/2-Inch X 9/16-Inch 1/2-Inch Shank
By Yonico
In Stock
$22.95

mpn: 14976, ean: 0765573828191,

4.7 out of 5 stars with 13 reviews
Cut perfectly clean 1-1/2'' wide dados with the Yonico 14976 bottom cleaning router bit. The two cutters meet in the center of the bit which leaves behind a very cleanly routed path. Can also be used to clear larger areas of material. 1/2'' shank.Industrial Quality Router Bits. C3 Micro-grain Tungsten Carbide Cutters. Solid Hardened Steel Bodies with Anti-Kickback Design. Build-up & Heat Resistant Teflon Coating. Satisfaction Guaranteed & Lifetime Warranty. Build-up and Heat Resistant Teflon


Yonico 34221-SC CNC Router Bit Ball Nose Solid Carbide with 1/4-Inch X 1-Inch X 1/4-Inch X 2-1/2-Inch 1/4-Inch Shank
Yonico 34221-SC CNC Router Bit Ball Nose Solid Carbide with 1/4-Inch X 1-Inch X 1/4-Inch X 2-1/2-Inch 1/4-Inch Shank
By Yonico
In Stock
$14.95

mpn: 34221-SC, ean: 0765573829365,

4.4 out of 5 stars with 144 reviews
Best used for: Smooth contour milling & carving. • Cutting Diameter: 1/4'' • Cutting Length: 1'' • Shank Diameter: 1/4'' • Overall Length: 2-1/2'' • Flutes: 2 The ball nose end mills' rounded tip is designed to reduce tool markings on work pieces of intricate tool paths and varying depths. Larger bits will produce the smoothest results while smaller bits will produce the finest detail.Best used for: smooth contour milling. Cutting Diameter: 1/4'' • Cutting Length: 1''. Shank


Plews 70-025 Deluxe Bearing Packer
Plews 70-025 Deluxe Bearing Packer
By Plews
SKU: #2021-3278
In Stock
$17.94
$13.32
You Save: 26%

sku: 2021-3278, mpn: 70-025, ean: 5448095725784,

4.2 out of 5 stars with 106 reviews
This deluxe bearing packer is for use with either hand operated or power lube equipment. Made with rugged steel construction, it has a threaded center post for positive locking of wheel bearing. For bearings having a minimum ID of 1/2 inch to maximum OD of 5 inch, height of 1/4 inch to 2 inch.For use with either hand operated or power lube equipment. Made with rugged steel construction. Threaded center post for positive locking of wheel bearing. For bearings having a minimum ID of 1/2 inch to


Autek 10x Titanium Coated Carbide PCB Engraving CNC Bit Router Tool 30 Degree 0.1mm Tip(J3.3001Tix10)
Autek 10x Titanium Coated Carbide PCB Engraving CNC Bit Router Tool 30 Degree 0.1mm Tip(J3.3001Tix10)
By Autek
In Stock
$13.99

mpn: J3.3001Tix10pcs-SN, ean: 7147905897274,

4.6 out of 5 stars with 76 reviews
Specification: Material: blade carbide (tungsten steel) Degree: 30° Shank Diameter: 3.175mm Cutting Edge Diameter: 0.1mm Total Length: 30mm Quantity: 1set (10pcs) Guaranty: Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund or return! Features: Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life. Coated with titanium:Improve the speed and feed rate


Yonico 13168 Round Over Edging Router Bit with 3/4-Inch Radius 1/2-Inch Shank
Yonico 13168 Round Over Edging Router Bit with 3/4-Inch Radius 1/2-Inch Shank
By Yonico
In Stock
$19.73
$17.95
You Save: 9%

mpn: 13168, ean: 0765573828528,

4.0 out of 5 stars with 24 reviews
Round over bits create clean rounded profile edges adding a classic look to any project. The Yonico 13168 creates 3/4'' radius round overs.Industrial Quality Router Bits. C3 Micro-grain Tungsten Carbide Cutters. Solid Hardened Steel Bodies with Anti-Kickback Design. Build-up & Heat Resistant Teflon Coating. Satisfaction Guaranteed & Lifetime Warranty. Build-up and Heat Resistant Teflon Coating. Satisfaction Guaranteed and Lifetime Warranty.


CNBTR  1/4 Inch Shank Dia Silver & Red Carbide Woodworking Straight Router Bit Set Pack of 7
CNBTR 1/4 Inch Shank Dia Silver & Red Carbide Woodworking Straight Router Bit Set Pack of 7
By CNBTR
In Stock
$13.32
$11.22
You Save: 16%

mpn: CNBTR883, ean: 6930584299566,

4.8 out of 5 stars with 100 reviews
Feature: 1. Sharp edge, high hardness, high frequency welding technology. 2. Cuts all composite materials, plywoods, hardwoods, and softwoods. 3. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. 4. Safety instructions: Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial cutting/engraving, not hazardous article.


Superior Electric RC050PC 1/2 Inch Router Collet
Superior Electric RC050PC 1/2 Inch Router Collet
By Superior Electric
In Stock
$15.60
$10.63
You Save: 32%

mpn: RC050PC, ean: 0730337086919,

4.2 out of 5 stars with 110 reviews
Fits: Porter Cable: 690 Fixed Base Router | 6302 Type 1 Router | 6302 Type 2 Router | 6902 Type 3 Router Motor | 6302 Type 4 Router | 6902 Type 1 Router Motor | 6902 Type 2 Router Motor | 6302 Type 3 Router | 6902 Type 4 Router Motor | 6902 Type 5 Router Motor | 6902 Type 6 Router Motor | 6902 Type 7 Router Motor | 6902 Type 8 Router Motor | 690LR Fixed Base Router | 690LRVS Fixed Base Variable Speed Router | 691 Type 1 D Handle Router | 691 Type 2 D Handle Router | 691 Type 3 D Handle Router |


Bosch Clic-Change 3-Piece Self-Centering Drill Bit Assortment CC2430
Bosch Clic-Change 3-Piece Self-Centering Drill Bit Assortment CC2430
By Bosch
In Stock
$23.69
$19.80
You Save: 16%

mpn: CC2430, ean: 0000346315608,

4.0 out of 5 stars with 124 reviews
Swapping bits has never been easier, thanks to Bosch's Clic-Change bit design. Bosch's Clic-Change design is the first and still the most reliable tool-free bit changing system. The quick-change bit system offers fast, one-handed load and release of bits so that you can change without re-chucking for less downtime and more productivity. A self-centering design means less walking and more precise drill starts. For over 70 years, Bosch has been developing power tools that meet your specific


SILIVN Tongue and Groove Set, Router Bit Set, Wood Door Flooring 3 Teeth Adjustable, 1/2 Inch Shank T Shape Wood Milling Cutter Woodworking Tool, 2 Piece
SILIVN Tongue and Groove Set, Router Bit Set, Wood Door Flooring 3 Teeth Adjustable, 1/2 Inch Shank T Shape Wood Milling Cutter Woodworking Tool, 2 Piece
By SILIVN
In Stock
$30.99
$19.99
You Save: 35%

mpn: ZH-148, ean: 0191094075163,

4.1 out of 5 stars with 62 reviews
Specifications:Material:Cemented Carbide Color:Silver & YellowSize:Shank diameter: 1/2 ''(12.7 MM)Tooth width: 1/4 ''(6.35 MM) Tooth depth: 1/4 ''(6.35 MM)Tongue Router Bit Size:75 x 40mm/2.95 x 1.57''(L x Dia)Groove Router Bit Size:72 x 40mm/2.83 x 1.57''(L x Dia)Max Rotating Speed: 12000Weight:238gApplicable to the size of the board:13-19mmPackage included: 1xTongue Router Bit 1xGroove Router Bit Safety instructions: 1. Razor blades permanently enclosed in a cartridge or housing with less


Woodpeckers Precision Woodworking Tools WPDPPACK1 Drill Press Table, 1-Pack
Woodpeckers Precision Woodworking Tools WPDPPACK1 Drill Press Table, 1-Pack
By Woodpeckers Precision Woodworking Tools
In Stock
$199.85

mpn: WPDPPACK1, ean: 0689076666206,

4.5 out of 5 stars with 109 reviews
Woodpeckers Drill Press Table features a generous 16-inch by 23-inch by 1-inch surface constructed of a MDF core covered with Formica Micro-Dot laminate - a unique texture which is a grid of small dimples that collect saw dust, allowing the surface to better grip the work piece under pressure. Removable insert minimizes tear-out when drilling through material without the need of a backer board and the insert can easily be replaced with any 1/2-inch thick material. Two double-wide T-tracks are


Bosch 85078 3/8 In. High Speed Steel Carbide-Tipped Keyhole Bit
Bosch 85078 3/8 In. High Speed Steel Carbide-Tipped Keyhole Bit
By Bosch
In Stock
$13.64
$8.61
You Save: 37%

mpn: 85078, ean: 0767654937136,

4.2 out of 5 stars with 61 reviews
Large Diameter: 3/8''Small Diameter: 3/16''Overall Length: 1-7/8''Cutting Edge Length: 3/16''Shank: 1/4''Keyhole Bits Are Used To Cut Keyhole Slots In Plaques, Picture Frames And Other Wall Hanging ItemsWide And Narrow Flute Design Requires Lower Feed Rates To Prevent BreakagePlunge Tip DesignMicrograin Carbide Tips Provide Superior Wear Resistance And Long LifeUsed for routing mounting slots in picture frames, plaques and other wall decorations. Control cut design helps minimize kickback. Wide


Yonico 14323q 3 Undersized Plywood Dado Router Bits for 3/4'', 1/2'' & 1/4'' Plywood with 1/4'' Shank
Yonico 14323q 3 Undersized Plywood Dado Router Bits for 3/4", 1/2" & 1/4" Plywood with 1/4" Shank
By Yonico
In Stock
$26.98
$23.95
You Save: 11%

mpn: 14323q, ean: 0765573829761,

4.3 out of 5 stars with 15 reviews
This 3 bit Yonico 14323q Undersized Dado Router Bit Set will make perfectly sized dado cuts for 3 commonly used sizes of plywood; 3/4'', 1/2'' and 1/4''. Plywood thicknesses are actually thinner than the measurement stated. These bits are slightly narrower or ''under sizes'' to match the actual thickness of plywood. Bits Included • 13/64'' W X 1/2'' H Dado Bit for 1/4'' Plywood • 31/64'' W X 3/4'' H Dado Bit for 1/2'' Plywood • 23/32'' W X 1'' H Dado Bit for 3/4'' Plywood Bits come in a


Freud 9/16'' Depth Slotting Cutter Set with 1/4'' Shank (63-100)
Freud 9/16" Depth Slotting Cutter Set with 1/4" Shank (63-100)
By Freud
In Stock
$25.99
$25.97

mpn: 63-100, ean: 5899406143344,

4.3 out of 5 stars with 101 reviews
Includes three wing slotting cutter, arbor and ball bearing.Overall Dia. (D) 2'', Carbide Height (h) 1/16'', 9/16'' Cut Depth, 1/4'' Shank. Cuts all composition materials, plywoods, hardwoods, and softwoods.. Use on hand-held and table-mounted portable routers..


Whiteside Router Bits 6400 Steel Router Collet with 1/4-Inch Inside Diameter and 1/2-Inch Outside Diameter
Whiteside Router Bits 6400 Steel Router Collet with 1/4-Inch Inside Diameter and 1/2-Inch Outside Diameter
By Whiteside Router Bits
SKU: #412-6400
In Stock
$14.74
$12.53
You Save: 15%

sku: 412-6400, mpn: 6400, ean: 0844278064001,

4.6 out of 5 stars with 146 reviews
Whiteside Machine 6400 steel router collet - reducer bushing 1/4 id x 1/2'' od x 1-1/4'' oalWhiteside Router Bits are made with Premium Carbide. Made in USA. Precision ground for proper balance at high RPM.


Yonico 17504 50 Bits Professional Quality Router Bit Set C3 Carbide 1/4-Inch Shank
Yonico 17504 50 Bits Professional Quality Router Bit Set C3 Carbide 1/4-Inch Shank
By Yonico
In Stock
$109.95

mpn: 17504, ean: 0765573827392,

4.0 out of 5 stars with 17 reviews
Included in this incredible set are 50 professional quality router bits, manufactured with K-10 carbide cutters and ultra sharp blades for the price of only several single router bits! These bits are of the quality sold in stores for $10- $25 a piece! K-10 is a premium micro-grain carbide with outstanding abrasion resistance and high strength for longer cutting life. Bits are precision balanced to within .002'' to virtually eliminate vibrations. Fully enclosed, high quality lubricated bearings



Viewing Page 2 of 8

View more products in Power Tool Parts & Accessories.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - celebritydressdesign.com. All Rights Reserved.