Browse Our Catalog

Pin Punches - Page 3 - Blowout Sale! Save up to 56%


Blowout Sale! Up to 56% off on Pin Punches at Celebrity Dress Design, Page 3. Top brands include Mayhew Tools, TruePower, SportsEveryday, Fabcell, CSLU, JawayTool, HORUSDY, KMDECYY, Rennsteig, PRO TOOL SUPPLY, Dasco Pro, Proto, Ironton, TuffMan Tools, Picard, Mayhew, Wilde Tool, Pittsburgh, & Wright Products. Hurry! Limited time offers. Offers valid only while supplies last.



Mayhew Pro 31999 0.498-Inch Body Pneumatic Taper Punch
By Mayhew Tools
In Stock
$22.86
$20.45
You Save: 11%

mpn: 31999, ean: 0045256319995,

4.6 out of 5 stars with 68 reviews
The mayhem 31999 pneumatic taper punch, 0.498 inch body is used with a pneumatic tool. Black oxide finish for additional rust protection. Made in the USA. Over all length: 7-1/2-inch, body size: 0.498-Inch, body type: round, blade width: 3/4-inch, and weight: 0.49-Pound. Comes with an unlimited lifetime warranty. Mayhew stands for quality, dependability, and confidence. When the caliber of the tools is just as important as the skills of the professionals employed, businesses trust Mayhew to get


Closeout, Discontinued TruePower 3pc Tapered Alignment Punch Set Extra Long Mechanics Steel Taper Tools
By TruePower
In Stock
$27.95

mpn: 02-0236, ean: 0870208002362,

4.0 out of 5 stars with 128 reviews
TruePower 3 PC. EXTRA LONG TAPER PUNCH SET features: Drop Forged, Heat Treated Steel Construction, Black Oxide Finish for Durability, Precision-Machined and Polished Tapered Heads, Extra-Long Sizes Can Reach Tight Spots, Tapered Tips Apply Concentrated Driving Force.Hardende high carbon hex stock steel. Precision ground and polished tapered tips. Black oxide finish resists corrosion. Extra-long sizes can reach tight spots. 3/16'' x 8'', 1/4'' x 12'', 5/16'' x 15''.


SportsEveryday 9 Pc Roll Pin Punch Tool and 4 Pc Starter Roll Pin Punch Set for Gunsmithing/Watch Bike Repairing
By SportsEveryday
In Stock
$21.99
$20.99
You Save: 5%

ean: 0191869356190,

4.2 out of 5 stars with 11 reviews
The punch set consists of nine different sizes of heat treated steel punches and four stainless steel starter punches. 9 pc roll pin punch sets includes:1/16'', 5/64'', 3/32'', 1/8'',5/32'',3/16'',7/32'',1/4'',5/16'' 4 pc starter roll pin punch sets includes:1/8'',5/32'', 3/16'',7/32''9 pc roll pin punch toll are made from drop forged steel,heat treated to provide extreme durability, eliminates bending or breaking.. 4 pc start roll pin are made from stainless steel.These starter roll pins are


Fabcell 9 Pieces Roll Pin Punch Set - Gun Bolt Catch Roll Pin Punch Tool Kit for Automotive/Jewelers/Gunsmith/Watch Makers/Repairs and Crafts
By Fabcell
In Stock
$19.99
$12.99
You Save: 35%

ean: 0656699479148,

4.2 out of 5 stars with 18 reviews
Note: Fabcell 9 Pieces Roll Pin Punch Set Tool have a coating of some sort of oil which using to prevent rust. ★Marked roll pin punch size on the handle, easy to recognize. ★The double-faced design of the hammer consists of a yellow polyurethane rubber head for a cushioned strike and black oil-resistant rubber head for an oil surface. ★Item weight: 11.4oz ★Package weight: 11.9oz ★Package size: 7.5*4*1.58inch Package Included: -1*1/16''x2-3/4''Roll Pin Punch -1*5/64''x3-1/4''Roll Pin


CSLU 315PCS Hardware Carbon Steel Split Spring Steel Dowel Roll Pin Assorted Set
By CSLU
In Stock
$25.99
$21.99
You Save: 15%

mpn: CS0096, ean: 0602463934719,

4.2 out of 5 stars with 78 reviews
Specifications: Box Size:210mm x 110mm x 30mm Contents: M1.8X5=10pc M1.8X8=10pc M1.8X19=10pc M2.2X6=10pcs M2.2X13=10pc M2.2X25=10pc M2.6X16=10pc M2.6X25=10pc M2.6X32=10pc M3.5X15=15pc M3.5X25=15pc M3.5X32=15pc M4.3X16=10pc M4.3X25=10pc M4.3X38=10pc M5.1X16=15pc M5.1X25=15pc M5.1X32=15pc M5.9X16=10pc M5.9X32=10pc M5.9X45=10pc M6.8X16=10pc M6.8X32=10pc M6.8X45=10pc M8.4X19=10pc M8.4X38=10pc M8.4X50=10pc M10X19=5pc M10X38=5pc M10X50=5pc Package Included: 315Pcs the Steel elastic cylindrical


JawayTool 9 Pieces Bolt Catch Roll Pin Punch Set Tool Kit –
By JawayTool
In Stock
$19.49
$19.24
You Save: 1%

mpn: JYT-53257, ean: 0736649532571,

4.2 out of 5 stars with 23 reviews
JawayTool roll pin punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. These have little bump on the end makes it line up on the roll pin for a nice easy removal of the roll pin, this set is ideal for repairing or servicing guns, small equipment, machines, and vehicles. The punch tips have a reverse-taper design making them slightly wider than the rest of the shaft so they won't stick in pin holes, each punch is heat treated steel this


9 Pieces Roll Pin Punch Set, Gunsmithing Kit Removing Repair Tool with Holder for Automotive, Watch Repair,Jewelry and Craft
By HORUSDY
In Stock
$10.98

mpn: 97288,

4.3 out of 5 stars with 81 reviews
9 pieces roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability. Perfect tool for gunsmith, jewelers, watchmakers building, engineers, carpenters - use on guns, machinery, vehicles, woodwork and crafts, excellent tool for adding into your armorers wrench package Pack Includes: 1-pc. 1/16'' X 2 3/4'' Punch 1-pc. 5/64'' X 3 1/4'' Punch 1-pc. 3/32'' X 3 1/2'' Punch 1-pc. 1/8'' X 4'' Punch 1-pc. 5/32''






BRASS PIN PUNCH SET, 5PC, LONG DRIVE KNURLED HANDLES - GUNSMITH 1/8" 3/16" 1/4" 5/16" 3/8"
By PRO TOOL SUPPLY
In Stock
$19.99

mpn: 58023, ean: 0709257580234,

4.7 out of 5 stars with 7 reviews
8'' Long to reach deeply set pins in obstructed areas Solid brass striking heads for soft metal and non-sparking applications Knurled steel handles for sure grip and long life Lifetime WarrantyVarying Pin Sizes 1/8'', 3/16'', 1/4'', 5/16'' and 3/8''. Heat treated carbon steel construction for long life.


Dasco Pro 254 Roll Pin Punch, 5/32-Inch
By Dasco Pro
In Stock
$11.28

mpn: 254, ean: 0018371000420,

4.6 out of 5 stars with 68 reviews
Precision machined Roll Pin Punches are specifically designed to remove spring/roll pins. The heat treated point has a rounded nib to center the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal. The punch shaft allows for a long, straight removal of the pin without damaging the pin wall material. Dasco Pro offers a range of punch point sizes to accurately fit the pin size to be removed. All Roll Pin Punches are made of high strength steel


Stanley Proto J47A Pin Punch Set, 7-Piece
By Proto
In Stock
$42.17

mpn: J47A, ean: 0662679010218,

4.6 out of 5 stars with 122 reviews
Stanley J47A Proto 7 Piece Pin Punch Set Made from S2 steel and specially heat-treated for greater strength and durability. Two-piece design allows the tip to be hard for durability while allowing it to be produced straight to help prevent binding. Modified parabolic striking end to help reduce mushrooming and chipping. Black oxide finish to help prevent rust corrosion; extending tool life and performance. A polished identification panel on one of the flats is marked with the tool number and


Dasco Pro 88 Punch/Chisel Set, 12-Pc. - Quantity 3
By Dasco Pro
In Stock
$110.97
$102.13
You Save: 8%

mpn: 88, ean: 0018371501149,

4.5 out of 5 stars with 103 reviews
12 Piece, Punch and Chisel Kit, Contains 6 Pin Punches In Sizes 1/16'', 1/8'', 5/32'', 3/16'', 1/4'' and 5/16'', 3 Cold Chisels In Sizes 5/16'', 5/8'' and 3/4'' and 1 Each 3/8'' Prick Punch, 1/4'' Center Punch and 7'' Long Scratch Awl, The Cold Chisels Feature The Targethead and tm. Design To Reduce Spalling and Mushrooming.Dasco Pro. 88. 3. NEW. 7.65.


Ironton Broad Head Bull Pin - 10in.L x 1 1/16in. Top Dia., 1/4in. Point Dia.
By Ironton
In Stock
$14.99
4.4 out of 5 stars with 45 reviews
The Ironton Broad Head Bull Pin is ideal for aligning bolt holes when working with steel construction. Forged, heat-treated bull pin increases efficiency by providing a larger striking surface. Pieces (qty.): 1, Material Type: Carbon steel, Tool Length (in.): 10Head design reduces chance of pin slipping from hand when aligning holes. Angled head and smooth blending of radii increases strength and reduces danger of chipping. Broad head design resists mushrooming, providing longer tool life than


TuffMan Tools, Roll Pin Punch Set 9pc - Great for Gun Building and Removing Pins
By TuffMan Tools
In Stock
$17.99
$11.49
You Save: 36%

mpn: Pin Punch 9pc, ean: 0645905999754,

4.0 out of 5 stars with 68 reviews
TuffMan Tools specialize in manufacturing high quality tools, supplying all of the United States of America. Roll pin punches of smaller sizes are NOT brute force items. It is advised you do not beat on them with large hammers, you MUST make sure you are driving the pin in the correct direction, as the holes they are used in are tapered. You must make sure the punch is absolutely straight and inline with the pin you are removing and the work piece MUST be properly supported with a proper bench


0002501-15 Punch Round 2.425 Lbs Ø15Mm
By Picard
In Stock
$151.87
$151.43

mpn: 0002501-15, ean: 4016671002539,

4.9 out of 5 stars with 26 reviews
You will find everything here even if you are looking for a special tool. Our range of products comprises 700 different products. Decades of experience and continuous improvement of technology assure the famous quality of Picard products.Diameter: 15 mm. With handle made of Ash. Weight of the head: 2.425 lbs.


Mayhew Pro 15070 150-Line Punch and Chisel Set, 14-Piece
By Mayhew
In Stock
$148.84
$133.20
You Save: 11%

mpn: 15070, ean: 0784497108752,

4.8 out of 5 stars with 7 reviews
Mayhew 15070 150 Line, 14 piece Punch and Chisel Set features high-grade S-2 steel for superior tensile strength, toughness, and long life. Full shank heat treating and parabolic head to reduce mushrooming and chipping of struck end. Professional black oxide finish for enhanced corrosion resistance. Full, unconditional lifetime warranty.14 piece punch and chisel set. High-grade S-2 steel for superior tensile strength, toughness, and long life. Professional black oxide finish for enhanced


Wilde Tool RS 564 Roll Spring Punch, 5/64 inch
By Wilde Tool
In Stock
$12.58

mpn: RS 564.NP/SP, ean: 0085432052711,

4.9 out of 5 stars with 89 reviews
High Carbon Molybdenum Steel for strength and durability. Polished finish. It's of durable quality and highly efficient.Point Size: 5/64 inch. Length: 4-3/4 inch. Pin Length: 2.65. Stock Size: 5/16 inch. Individually Heat Treated High Carbon Molybdenum Steel.


8 Piece Pin Punch Set 4 inch Long with Knurled Handle 1/16'', 3/32'', 1/8'', 5/32'', 3/16'', 7/32'', 1/4'', 5/16''
By Pittsburgh
In Stock
$17.49
$12.54
You Save: 28%

mpn: 43219-29006, ean: 0792363934244,

4.2 out of 5 stars with 38 reviews
This 8 piece pin punch set is only 4 in. long so you can easily reach pins in confined spaces. The carbon steel set has a black oxide finish to prevent corrosion. Knurled handles help you get a firm, comfortable grip.Just 4'' long to let you reach pins in tight areas. Pin sizes: 1/16'', 3/32'', 1/8'', 5/32'', 3/16'', 7/32'', 1/4'', 5/16''. Carbon steel construction. Black oxide finish to prevent corrosion. Knurled handle.


Wright Tool 9681 Mayhew #62252 Pilot Punches Set, 9-Piece by Wright Tool
By Wright Products
In Stock
$203.29

mpn: 5738163, ean: 0756655738163,

4.8 out of 5 stars with 25 reviews
Weight 1.00;Part number and description: 9667 1/16 #1 pilot punch (Mayhew #25000), 9668 5/64 #2 pilot punch (Mayhew #25001), 9669 3/32 #3 pilot punch (Mayhew #25002);Supplied in plastic pouch;9670 1/8 # 4 pilot punch (Mayhew #25003), 9671 5/32 #5 pilot punch (Mayhew #25004), 9672 3/16 #6 pilot punch (Mayhew #23005);9673 7/32 #7 pilot punch (Mayhew #25006), 9674 1/4 #8 pilot punch (Mayhew #25007), 9675 5/16 #9 pilot punch (Mayhew #25008)Wright Tool 9681 Mayhew #62252 Pilot Punches Set, 9-Piece.



Viewing Page 3 of 7

View more products in Punches.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - celebritydressdesign.com. All Rights Reserved.