Celebrity Dress Design

End Mills - Super Savings! Save up to 38%


Super Savings! Up to 38% off on End Mills at Celebrity Dress Design. Top brands include ATOPLEE, Niagara Cutter, JERRAY, SGS, LMT Onsrud, DRILLPRO, SHAVIV, Jet, YG-1, Accusize Industrial Tools, Dorian Tool, Allied Machine & Engineering Corp, & Kodiak Cutting Tools. Hurry! Limited time offers. Offers valid only while supplies last.



Atoplee 5 pieces 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4,3/8,1/2,5/8,3/4inch
Atoplee 5 pieces 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4,3/8,1/2,5/8,3/4inch
By ATOPLEE
In Stock
$13.79

mpn: 14110022, ean: 0602716194839,

4.6 out of 5 stars with 55 reviews
Features: 5 blade chamfering device 82 degrees For aluminum, iron, PV panels and other soft materials. During use, the five blade can better chip removal, the blade is not easily bluntMaterial: HSS4341. Shank Diameter: 6mm. Surface treatment: Grill...


Niagara Cutter N44545 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing Cut, Non-Center, 30-Degree, 5-Flute, 5.5'' OAL, 1.000'' Cut Diameter, 1.000'' Shank Diameter
Niagara Cutter N44545 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing Cut, Non-Center, 30-Degree, 5-Flute, 5.5" OAL, 1.000" Cut Diameter, 1.000" Shank Diameter
By Niagara Cutter
In Stock
$117.66
$116.99

mpn: REM445-1.000-D4-C030.3-Z5, ean: 0698036445454,

4.5 out of 5 stars with 14 reviews
The Niagara Cutter REM445 uncoated (bright) cobalt steel fine-pitch rougher end mill has a non-center-cutting design and is suitable for machining dense materials such as high-temperature alloys. The number of flutes varies by diameter to optimize th...


JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 90 Degree V-Groove Chamfer End, 1/4'' Diameter
JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 90 Degree V-Groove Chamfer End, 1/4" Diameter
By JERRAY
In Stock
$19.99
$13.99
You Save: 30%

mpn: PC-6.35x90degree,

4.5 out of 5 stars with 94 reviews
Type: Chamfering router bits Brand Name: JERRAY Tools Material :HRC50 Carbide with coated Shank Diameter:1/4"(6.35mm) 4Flutes Degree: 90°Type: Chamfering router bits / Brand Name: JERRAY Tools. Shape: V-shape / Degree: 90°. Shank diameter: 1/4"(6....


Niagara Cutter N76145 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing Cut, 20 Degree Helix, 5 Flutes, 5'' Overall Length, 1.000'' Cutting Diameter, 1.000'' Shank Diameter
Niagara Cutter N76145 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing Cut, 20 Degree Helix, 5 Flutes, 5" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter
By Niagara Cutter
In Stock
$350.76

mpn: N76145, ean: 0698036761455,

4.8 out of 5 stars with 56 reviews
The Niagara Cutter SR420 uncoated (bright) carbide square nose roughing end mill with corner chamfer has a 20-degree helix for high-performance roughing cuts in steel and stainless steel. The number of flutes varies by diameter to optimize the feed a...


SGS 36142 57 Power-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8'' Cutting Diameter, 13/16'' Cutting Length, 3/8'' Shank Diameter, 4'' Length
SGS 36142 57 Power-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8" Cutting Diameter, 13/16" Cutting Length, 3/8" Shank Diameter, 4" Length
By SGS
In Stock
$146.73
$131.14
You Save: 11%

mpn: 36142, ean: 0691781361420,

4.3 out of 5 stars with 67 reviews
Designed for high speed roughing and finishing of complex contoured shapes in hardened materials. The Turbo Carb end mill is made of an application specific carbide to improve wear resistance and toughness in demanding applications. The high performa...


LMT Onsrud 60-277 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 6.0000'' Overall Length, 0.7500'' Cutting Diameter, 0.7500'' Shank Diameter
LMT Onsrud 60-277 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 6.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter
By LMT Onsrud
In Stock
$280.15

mpn: 60-277, ean: 0895680012647,

4.5 out of 5 stars with 38 reviews
Designed for perfect balance and ultra smooth finish over a wide speed range. Use for Natural wood, plastic, composite plastic and solid surface.Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more br...


JERRAY CNC Carving 3.92 Deg 2 flutes Tapered Angle Ball Tip radius=1.0mm X 1/4'' Shank tungsten Solid Carbide HRC55 with TiAIN Coated
JERRAY CNC Carving 3.92 Deg 2 flutes Tapered Angle Ball Tip radius=1.0mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated
By JERRAY
In Stock
$29.99
$19.99
You Save: 33%

mpn: 1.0*D1/4"*1-1/4"*3"*2F,

4.5 out of 5 stars with 106 reviews
-Type: Tapered angle Ball Nose End Mill / Cone Cutters -Flutes: 2 Flutes -Tip Radius: 1.0mm -Shank Diameter: 1/4"((d1) -Cutting Length: 1-1/4"(L1) -Overall Length: 3"(L) -Single side angle B=3.92°(Approx.) -Coating: TiAIN -Material: imported tun...


8Pcs End Mill Bits, DRILLPRO HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16'' - 1/2''
8Pcs End Mill Bits, DRILLPRO HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16" - 1/2"
By DRILLPRO
In Stock
$14.98

mpn: DRILLPROQKOaoko120, ean: 6433235720018,

4.4 out of 5 stars with 35 reviews
Drillpro 8Pcs HSS CNC 4 Flute End Mill Cutter Drill Bits Notice: In order to adapt to the universal size of the world, this product is printed on the metric system1/16" =2mm, 1/8"=3mm, 5/32''=4mm, 3/16"=5mm, 1/4"=6mm, 5/16"8mm, 3/8"=10mm, 1/2"=12mm...


SHAVIV 90098 Zero-Flute Chamfering Kit
SHAVIV 90098 Zero-Flute Chamfering Kit
By SHAVIV
In Stock
$115.32

mpn: 90098, ean: 7296178498463,

4.1 out of 5 stars with 148 reviews
SHAVIV by Vargus is the original hand deburring tool in the market since the 1960's and is today distributed all over the world. SHAVIV is the answer to unwanted burrs on a wide variety of materials such as metal, plastics, wood and more. Wherever t...


Niagara Cutter N88436 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing Cutting, Non-Center Cutting, 30-Degree, 8-Flute, 6.75'' OAL, 2.000'' Cut Diameter, 2.000'' Shank Diameter
Niagara Cutter N88436 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing Cutting, Non-Center Cutting, 30-Degree, 8-Flute, 6.75" OAL, 2.000" Cut Diameter, 2.000" Shank Diameter
By Niagara Cutter
In Stock
$180.00

mpn: REM445-2.000-D2-C040.7-Z8, ean: 0698036884369,

4.6 out of 5 stars with 11 reviews
Multi Flute / M42 8 percentage Cobalt Steel.Cobalt roughing end mill for working on all types of materials and high temperature alloys especially slotting and profiling. Cobalt steel tools are similar to high-speed steel, but with more cobalt for imp...


JET CK-38 52-Piece Clamping Kit with Tray for 1/2-Inch T-slot
JET CK-38 52-Piece Clamping Kit with Tray for 1/2-Inch T-slot
By Jet
In Stock
$126.66
$99.00
You Save: 22%

mpn: 660038, ean: 0696738141391,

4.2 out of 5 stars with 95 reviews
CLAMPING KITS Metal storage tray can be mounted on machine or wall Three complete sets to choose from 52-piece kit includes: Six T-slot nuts Six Flange nutsCLAMPING KITS. Metal storage tray can be mounted on machine or wall. Three complete sets to ch...


YG-1 E5060 Carbide Ball Nose End Mill, Long Reach, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 5'' Overall Length, 1'' Cutting Diameter, 1'' Shank Diameter
YG-1 E5060 Carbide Ball Nose End Mill, Long Reach, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
By YG-1
In Stock
$508.36

mpn: 51600TF,

4.2 out of 5 stars with 13 reviews
The YG-1 E5060TF TiAlN-coated carbide long-length ball nose end mill has four flutes and a 30-degree helix angle for machining on steel, chromium-nickel steel, and malleable cast iron. Long-length end mills have longer cutting edges than standard-len...


AccusizeTools - 3/4'' 4 Flute M42 8% Cobalt TiAlN Roughing End Mill, 1102-0034
AccusizeTools - 3/4" 4 Flute M42 8% Cobalt TiAlN Roughing End Mill, 1102-0034
By Accusize Industrial Tools
In Stock
$29.00

mpn: 1102-0034, ean: 0641799800800,

4.3 out of 5 stars with 92 reviews


Dorian Tool C45 45 Degree Angle Double Indexable Chamfer Mill, 3-3/8'' Overall Length, 5/8'' Cutter Diameter, 3/4'' Shank Diameter, 7/32'' Face Width
Dorian Tool C45 45 Degree Angle Double Indexable Chamfer Mill, 3-3/8" Overall Length, 5/8" Cutter Diameter, 3/4" Shank Diameter, 7/32" Face Width
By Dorian Tool
In Stock
$107.53

mpn: C45-112-SD09-075, ean: 0733101654147,

4.2 out of 5 stars with 7 reviews
Cutting rake angle: +15 degree. Axial rake angle: 0 degree. Radial rake angle: +3 degree. Milling application are best in finishing and average in roughing.Positive inserts, 15 degree clearance. High rate of material removal. Torx screw locking syste...


Allied Machine & Engineering 25000S-075L Hardened Tool Steel T-A Drill Holder, Straight Flute, 3/4'' Diameter Straight Shank, 33/64'' to 11/16'' Drill Insert Range, Series 0, 4-1/2'' Drill Depth, 7-11/16'' Overall Length, Extended
Allied Machine & Engineering 25000S-075L Hardened Tool Steel T-A Drill Holder, Straight Flute, 3/4" Diameter Straight Shank, 33/64" to 11/16" Drill Insert Range, Series 0, 4-1/2" Drill Depth, 7-11/16" Overall Length, Extended
By Allied Machine & Engineering Corp
In Stock
$191.00

mpn: 25000S-075L,

4.9 out of 5 stars with 131 reviews
T-A Holders are for use with Original T-A and GEN2 T-A drill inserts. Original T-A drill inserts are an excellent choice for general purpose use. GEN2 T-A drill inserts provide lower drilling forces and increased drill stability. Precision, performan...


2PCS/Package JERRAY CNC Carving 2 Flutes Tapered Ball end Mills Angle 5.09° Tip Radius=0.25mm X 1/8'' Shank Tungsten Solid Carbide HRC55 with TiAIN Coated
2PCS/Package JERRAY CNC Carving 2 Flutes Tapered Ball end Mills Angle 5.09° Tip Radius=0.25mm X 1/8" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated
By JERRAY
In Stock
$19.99
$15.88
You Save: 21%

mpn: Tp-R0.25*D3.175*40,

4.5 out of 5 stars with 38 reviews
-Type: Tapered angle Ball Nose End Mill / Cone Cutters -Flutes: 2 Flutes -Tip Radius:0.25mm -Shank Diameter: 1/8"(3.175MM) -Cutting Length:15mm(L1) -Overall Length: 38mm(L) -Per side angle B=5.09°(Approx.) -Coating: TiAIN -Material: imported tun...


YG-1 EMB79 Carbide Ball Nose End Mill, Vibration Resistant, Weldon Shank, AlTiN Monolayer Finish, 4 Flutes, 3.5'' Overall Length, 0.625'' Cutting Diameter, 0.625'' Shank Diameter
YG-1 EMB79 Carbide Ball Nose End Mill, Vibration Resistant, Weldon Shank, AlTiN Monolayer Finish, 4 Flutes, 3.5" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
By YG-1
In Stock
$115.87

mpn: EMB79040,

4.3 out of 5 stars with 8 reviews
Higher speeds, deeper cuts and metal removal rates. Improved surface finishes. New "NANO" AlTiN coating. Machining of most materials under 40Rc.Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more bri...


Niagara Cutter N85956 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4'' Overall Length, 1.000'' Cutting Diameter, 1.000'' Shank Diameter
Niagara Cutter N85956 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter
By Niagara Cutter
In Stock
$199.13
$127.24
You Save: 36%

mpn: C330-1.000-D2-S.0-Z3, ean: 0698036859565,

4.4 out of 5 stars with 139 reviews
The Niagara Cutter C330 uncoated carbide square nose end mill has three flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has...


Kodiak Cutting Tools KCT136475 USA Made Solid Carbide End Mill, Long, 4 Flute, 1/4 Shank, 1'' Length of Cut, 4'' Overall Length, 1/4 Diameter
Kodiak Cutting Tools KCT136475 USA Made Solid Carbide End Mill, Long, 4 Flute, 1/4 Shank, 1" Length of Cut, 4" Overall Length, 1/4 Diameter
By Kodiak Cutting Tools
In Stock
$32.41
$19.99
You Save: 38%

mpn: KCT136475, ean: 0787269836792,

4.7 out of 5 stars with 40 reviews
1/4 Inch Diameter Solid Carbide End Mill - Long 1/4" Shank 1" Length of Cut 4" Overall Length 4 Flute Carbide - Long.Made In the USA. 1/4 Shank diameter. 1 Length of Cut. 4 Overall Length. 4 Flutes. ...


Kodiak Cutting Tools KCT129732 USA Made  Solid Premium Carbide End Mill, 2 Flute, 1/4'' Shank, 3/4'' Length of Cut, 2-1/2'' Overall Length, 1/4'' Diameter
Kodiak Cutting Tools KCT129732 USA Made Solid Premium Carbide End Mill, 2 Flute, 1/4" Shank, 3/4" Length of Cut, 2-1/2" Overall Length, 1/4" Diameter
By Kodiak Cutting Tools
In Stock
$18.81
$12.62
You Save: 33%

mpn: KCT129732,

4.9 out of 5 stars with 78 reviews
1/4 Inch Diameter Solid Carbide End Mill - Single End 1/4" Shank 3/4" Length of Cut 2-1/2" Overall Length 2 Flute Carbide - Single End.Premium Sub-Micrograin Carbide End Mill Made In the USA. 1/4" Shank Diameter. 3/4" Flute Length (Length of Cut), 30...



Viewing Page 1 of 9

View more products in Power Tool Parts & Accessories.
Feel free to Browse Our Catalog.

Scroll To Top


Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - celebritydressdesign.com. All Rights Reserved.